|
Fig. 7.80. Arrangement of elements of radio equipment: 1–antenna cable; 2, 6 – loudspeakers in forward doors; 3, 5 – loudspeakers in back doors; 4–the aerial on a roof; 7–audiosystem block
|
The arrangement of elements of radio equipment is shown on
fig. 7.80
.
Audiosystem block
Removal and installation
Disconnect a wire from the negative plug of the storage battery.
Unscrew two screws and two bolts of fastening of the bottom facing of the dashboard from the driver.
Disconnect from the bottom facing of the dashboard a cable of a drive of the lock of a cowl and separate the data line socket.
Remove a ware box.
Disconnect drive cables a zaslonok of adjustment of temperature and distribution of air streams.
Disconnect clips, separate sockets and a screw-driver carefully take the central panel of the dashboard.
|
Fig. 7.81. Removal of the block of an audiosystem
|
Unscrew four screws of fastening of the block of an audiosystem (fig. 7.81)
, separate sockets of wires and remove the audiosystem block.
Installation is carried out as it should be, the return to removal.
Loudspeakers
Removal and installation
Forward loudspeakers
Unscrew screws of fastening of the internal handle of a door, disconnect from the handle draft of a drive of the lock and draft of switching off of the lock, remove the internal handle of a door.
Unscrew screws of fastening of an upholstery of a forward door and carefully a screw-driver remove an upholstery.
PREVENTION
Used for upholstery removal a screw-driver wrap up a fabric not to damage a paint and varnish covering of a body.
|
|
Fig. 7.82. Screws of fastening of the forward loudspeaker
|
Remove the forward loudspeaker, having unscrewed four screws of fastening (fig. 7.82)
and having separated the contact socket.
Installation is carried out as it should be, the return to removal.
Back loudspeakers
Unscrew screws of fastening of the internal handle of a door, disconnect from the handle draft of a drive of the lock and draft of switching off of the lock, remove the internal handle of a door.
Unscrew screws of fastening of an upholstery of a forward door and a screw-driver carefully remove an upholstery.
PREVENTION
Used for upholstery removal a screw-driver wrap up a fabric not to damage a paint and varnish covering of a body.
|
|
Fig. 7.83. Screws of fastening of the back loudspeaker
|
Remove the back loudspeaker, having unscrewed four screws of its fastening (fig. 7.83)
and having separated the contact socket.
Installation is carried out as it should be, the return to removal.
Check of a technical condition of loudspeaker
Check the loudspeaker by means of an ohmmeter.
|
Fig. 7.84. The scheme of connection of an ohmmeter at loudspeaker check
|
The loudspeaker is serviceable, if an ohmmeter attached to conclusions («+») and («–») (fig. 7.84)
of the same its channel, shows demanded value of full resistance (4 Ohm).
One more sign of serviceability of loudspeaker is click which is listened at ohmmeter connection to loudspeaker conclusions.
Aerial
Removal and installation
|
Fig. 7.85. Installation of the shtyrevy aerial in the roof panel: 1–shtyrevy aerial; 2–roof panel; 3–nut; 4–roof upholstery
|
Installation of the shtyrevy aerial in the panel of a roof is shown on
fig. 7.85
.
Screw-driver with a flat shliyets remove a rasseivatel of a plafond of the console of a roof.
Remove the roof console, having unscrewed two screws of fastening and having separated the contact socket of a plafond of a roof.
Remove the aerial, having unscrewed a fastening nut.
Remove a sun-protection peak and a hand-rail, delay down an upholstery of a ceiling and remove an antenna cable.
Installation is carried out as it should be, the return to removal.