Hyundai Getz>> Electric equipment>> Sound signal
Removal and installation
Open a cowl and remove facing of the lock of a cowl, having unscrewed two screws of fastening.

Fig. 7.54. Bolt of fastening of a sound signal

Fig. 7.55. Contact socket of a sound signal

Remove a sound signal, having unscrewed a fastening bolt (fig. 7.54) and having separated the contact socket (fig. 7.55) .
Installation is carried out as it should be, the return to removal.

Check of a technical condition and adjustment
Check work of a sound signal, having submitted tension of the storage battery on signal conclusions — should work a sound signal. If it does not occur, replace a sound signal.
If force of sounding of a signal became less or there was a rattle, adjust a signal turn of the screw located on the case, in this or that party before receiving a loud and pure sound.

Fig. 7.56. Adjustment of a sound signal

Include a sound signal and achieve the necessary sounding by the adjusting screw (fig. 7.56) .

After adjustment законтрите the adjusting screw for what put on it a little paint.