Hyundai Getz>> Body>> Removal and installation of elements of the equipment of salon and furnish of a body of the car
Central console of the dashboard 

Fig. 8.62. Central console of the dashboard: 1–cover of the lever of gear shifting; 2–switches of heating of seats; 3–lighter; 4–facings of the central console; 5–contact sockets of elements of heating of seats; 6–cover; 7–central console


The central console of the dashboard is shown on fig. 8.62 .
Removal and installation

Fig. 8.63. Screws of fastening of the console


Unscrew two screws of fastening of the console (fig. 8.63) .
Establish the lever of a drive of lay brake system in extreme top situation and remove the console, having lifted it for a back part.
Separate the contact socket of the lighter.
Installation is carried out as it should be, the return to removal.

Dashboard

Fig. 8.64. Dashboard: 1–casing of a steering column; 2–steering column; 3–peak of a combination of devices; 4–combination of devices; 5–lateral nozzle of system of ventilation of a body; 6, 12 – face facing of the dashboard; 7–arm; 8– dashboard; 9–audiosystem block; 10-lateral nozzle of system of ventilation of a body; 11-arm; 13-ware box; 14-arm of fastening of the block of an audiosystem; 15-central console of the dashboard; 16-switches of the central console of the dashboard; 17-bottom facing of the dashboard


The dashboard is shown on fig. 8.64 .
The dashboard is executed in the form of a uniform detail and represents a metal framework with a power absorbing layer from пенополиуретана which from the outer side is revetted with a decorative film.

       PREVENTION
When using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.

Removal and installation of a combination of devices
Establish a steering column in the bottom situation.

Fig. 8.65. Screw of fastening of a peak of a combination of devices: 1–screw of fastening of a peak of a combination of devices; 2–peak of a combination of devices


Remove a peak of a combination of devices, having unscrewed the fastening screw (fig. 8.65) .
Unscrew screws of fastening of a combination of devices and take out it from a nest.

Fig. 8.66. Contact sockets of a combination of devices


Separate contact sockets of a combination of devices and remove a combination of devices (fig. 8.66) .
Installation is carried out as it should be, the return to removal.

       PREVENTIONS
When using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the dashboard.

Removal and installation of the bottom facing of the dashboard
Establish a steering column in the top situation.
Remove facing of a threshold of a door and the bottom facing of a forward rack.

Fig. 8.67. Cover of the block of safety locks of the dashboard


Uncover the block of safety locks (fig. 8.67) .

Fig. 8.68. Elements of fastening of the bottom facing of the dashboard (are specified by shooters): 1–I will corrode self-diagnostics


Unscrew two bolts and two screws of fastening of the bottom facing, disconnect the case of the socket of self-diagnostics and a cable of a drive of the lock of a cowl and remove the bottom facing of the dashboard (fig. 8.68) .
Installation is carried out as it should be, the return to removal.

       PREVENTIONS
When using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the dashboard.

Removal and installation of a ware box
Open a ware box.

Fig. 8.69. Holders of a ware box (are shown by shooters)


Remove holders of a ware box (fig. 8.69) .
Take out a ware box, having unscrewed screws of fastening of loops of a box.
Installation of a ware box is carried out as it should be, the return to removal.

Removal and installation of the bottom facing of the central console of the dashboard
Remove the bottom facing of the central console of the dashboard, having unscrewed the fastening screw from the driver.
Installation of the bottom facing of the central console of the dashboard is carried out as it should be, the return to removal.

       PREVENTION
When using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the dashboard.

Cнятие and installation of facing of the central console of the dashboard
Remove a ware box.
Remove the bottom facing of the central console of the dashboard.
Disconnect drive cables a zaslonok of system of ventilation and salon heating from the corresponding levers of a drive a zaslonok.

Fig. 8.70. Tips of cables of a drive zaslonok of system of ventilation and salon heating


By means of a stripper remove the central console, since its lower part (fig. 8.70) .
Separate contact sockets of switches of the central console of the dashboard and remove facing of the central console.
Installation of facing of the central console of the dashboard is carried out as it should be, the return to removal.

       PREVENTION
When using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the dashboard

Removal and installation of the block of an audiosystem
Remove a ware box.
Remove the bottom facing of the dashboard.
Remove facing of the central console of the dashboard.

Fig. 8.71. Screws of fastening of the block of an audiosystem


Unscrew screws of fastening of the block of an audiosystem (fig. 8.71) .
Separate contact sockets of the block of an audiosystem and remove it.
Installation of the block of an audiosystem is carried out as it should be, the return to removal.

       PREVENTION
When using a screw-driver wrap up its edge a fabric not to damage a detail. For protection of hands put on gloves.
Watch to damaging the dashboard.

Removal and installation of a beam of the dashboard
Remove a steering wheel with the safety cushion module.
Remove the bottom facing of the dashboard.
Remove a ware box.
Remove the bottom facing of the central console of the dashboard.
Remove facing of the central console of the dashboard.
Remove an audiosystem.
Remove face facings of the dashboard.

Fig. 8.72. Contact socket of the aerial of an audiosystem: 1–windscreen; 2–contact socket of the aerial of an audiosystem; 3–dashboard


Separate the radio antenna socket (fig. 8.72) .
Remove the dashboard, having unscrewed nine bolts of its fastening: four bolts of fastening are located (on two) under face facings of the panel.
Installation of the dashboard is carried out as it should be, the return to removal.

Details of furnish of salon

Fig. 8.73. Facings of salon of cars with a five-door body: 1–facing of a forward rack of a body; 2–facing of a threshold of a forward door; 3–top facing of an average rack of a body;
 4–facing of a threshold of a back door; 5–facing of a back rack of a body; 6–back facing of a luggage compartment; 7–shelf of a luggage compartment; 8–lateral facing of a luggage compartment; 9–bottom facing of an average rack of a body; 10-bottom facing of a forward rack of a body


Fig. 8.74. Facings of salon of cars with a three-door body: 1–facing of a forward rack of a body; 2–facing of a threshold of a door; 3– top facing боковины; 4–facing боковины; 5–lateral facing of a luggage compartment; 6–shelf of a luggage compartment; 7–back facing of a luggage compartment; 8– rug of a luggage compartment; 9–back facing of a threshold; 10-bottom facing of a forward rack of a body


Facings of salon of cars with a five-door body are shown on fig. 8.73 , cars with a three-door body — on fig. 8.74 .

       NOTE
Before removal of facings remove external a sealant.

Facing of a forward rack of a body
Remove facing of a forward rack by means of a stripper of facings.

Facing of a threshold of a forward door
Cars with a five-door body
Remove facing of a threshold of a forward door, having disconnected three clips of fastening.
Installation is carried out as it should be, the return to removal.
Cars with a three-door body

Fig. 8.75. Clip of fastening of facing of a threshold of a forward door


Remove facing of a threshold of a forward door, having disconnected five clips of fastening (fig. 8.75) .
Installation is carried out as it should be, the return to removal.

Bottom facing of a forward rack
Remove facing of a threshold of a forward door.
Remove the bottom facing of a forward rack, having disconnected a clip of its fastening.
Installation is carried out as it should be, the return to removal.

Facing of a threshold of a back door
Cars with a five-door body

Fig. 8.76. Fastenings of facing of a threshold of a back door


Remove facing of a threshold of a back door, having unscrewed screws of fastening and having disconnected the holder (fig. 8.76) .
Installation is carried out as it should be, the return to removal.
Cars with a three-door body

Fig. 8.77. Fastenings of facing of a threshold of a back door


Remove back facing of a threshold, having unscrewed fastening screws (fig. 8.77) .
Installation is carried out as it should be, the return to removal.

Bottom facing of an average rack of a body
Remove facing of a threshold of a forward door.
Remove facing of a threshold of a back door.

Fig. 8.78. Bolt of the bottom fastening of a seat belt of a forward seat


Fig. 8.79. Removal of the bottom facing of an average rack of a body


Unscrew a bolt of the bottom fastening of a seat belt (fig. 8.78) of a forward seat, disconnect a clip and remove the bottom facing of an average rack (fig. 8.79) .
Moment of an inhaling of a bolt of the bottom fastening of a seat belt of a forward seat of 40-50 N · m.
Installation is carried out as it should be, the return to removal.

Top facing of an average rack of a body
Remove facing of a threshold of a forward door.
Remove facing of a threshold of a back door.
Remove the bottom facing of an average rack.
Remove facing of the top fastening of a seat belt of a forward seat, unscrew a bolt of fastening and remove the top facing of an average rack.
Moment of an inhaling of a bolt of fastening of a seat belt of a forward seat of 40-50 N · m.
Installation is carried out as it should be, the return to removal.

Facing боковины (cars with a three-door body)
Remove forward facing of a threshold.
Remove back facing of a threshold.
Remove facing of a bolt of fastening directing a seat belt.
Unscrew a bolt of the bottom fastening of a seat belt and the screw, remove facing боковины.

Shelf of a luggage compartment
Disconnect holding cords of the shelf and remove the shelf, having pulled it up.
Installation of the shelf is carried out as it should be, the return to removal.

Back facing of a luggage compartment
Remove the shelf of a luggage compartment.
Remove a rug of a floor of a luggage compartment.
Remove back facing of a luggage compartment, having unscrewed fastening screws.
Installation is carried out as it should be, the return to removal.

Lateral facing of a luggage compartment
Remove facing of a threshold of a back door.
Cast away forward a back seat.
Remove a rug of a luggage compartment.
Remove back facing of a luggage compartment.
Remove a lamp of illumination of a luggage compartment.

Fig. 8.80. Elements of fastening of lateral facing of a luggage compartment of cars with a five-door body


Fig. 8.81. Elements of fastening of lateral facing of a luggage compartment of cars with a three-door body


Unscrew bolts of fastening of a floor of a luggage compartment, weaken an inhaling of a bolt of the bottom fastening of a seat belt of a back seat and by means of a stripper remove lateral facing of a luggage compartment (fig. 8.80 and 8.81) .
Installation is carried out as it should be, the return to removal.

Facing of a back rack of a body
Cars with a five-door body

Fig. 8.82. A bolt of the bottom fastening of a seat belt of a back seat (it is specified by an arrow)


Unscrew a bolt of the bottom fastening of a seat belt of a back seat (fig. 8.82) .
Unscrew a bolt of fastening of a seat belt of an average place of a back seat.

Fig. 8.83. Removal of facing of a back rack of a body


By means of a stripper remove facing of a back rack of a body (fig. 8.83) .
Installation is carried out as it should be, the return to removal.
Cars with a three-door body
Remove back facing of a threshold.
Remove facing боковины.
Remove back facing of a luggage compartment.
Remove lateral facing of a luggage compartment.
Unscrew two screws, unscrew a bolt of fastening of a seat belt of an average place of a back seat and remove facing of a back rack of a body.

Sun-protection peaks
Unscrew screws of fastening of a sun-protection peak, remove a peak and the holder.
Installation is carried out as it should be, the return to removal.

Hand-rail
Take aside facing of the screw of fastening of a hand-rail, having hooked it a screw-driver.

Fig. 8.84. Screws of fastening of a hand-rail (are shown by shooters)


Remove a hand-rail, having unscrewed fastening screws (fig. 8.84) .
Installation is carried out as it should be, the return to removal.

Ceiling console

Fig. 8.85. Removal of a rasseivatel of a plafond of illumination of salon


Remove a rasseivatel of a plafond of illumination of salon, having accurately hooked it a screw-driver with a flat shliyets (fig. 8.85) .

Fig. 8.86. Bolts of fastening of the console of a roof


Unscrew two bolts of fastening of the console (fig. 8.86) , separate the contact socket and remove the roof console.
Installation is carried out as it should be, the return to removal.

Roof upholstery
For removal of an upholstery of a roof remove the following details:
– forward seats;
– back seat;
– roof console;
– facings of forward racks of a body;
– facings of thresholds of forward doors;
– facings of thresholds of back doors;
– seat belts of forward seats;
– bottom and top facings of average racks of a body;
– bottom fastenings of seat belts of a back seat;
– back facing of a luggage compartment;
– fastening of a seat belt of an average place of a back seat;
– lateral facings of a luggage compartment;
– facings of back racks of a body;
– sun-protection peaks and hand-rail.
Remove a roof upholstery, having disconnected holders.
Installation is carried out as it should be, the return to removal.

Seats
Forward seats

Fig. 8.87. Forward seat: 1–head restraint; 2–seat back; 3–handle of adjustment of a tilt angle of a back of a seat; 4–handles of adjustment of longitudinal provision of a seat; 5–seat sled; 6–seat pillow


The forward seat is shown on fig. 8.87 .
Removal and installation
Unscrew four bolts of fastening of a forward seat.
Moment of an inhaling of bolts of fastening of a forward seat of 35-55 N · m.
Separate the contact socket of a control lamp of not fastened seat belt and remove a forward seat.
Installation of forward seats is carried out as it should be, the return to removal.

Back seat
Removal and installation

Fig. 8.88. Bolts of fastening of a back seat


Unscrew four bolts of fastening of a back seat (fig. 8.88) .
Moment of an inhaling of bolts of fastening of a back seat of 35-55 N · m.
Combine a back seat and take out it from the car through a doorway.

Seat belts
Precautionary measures at the address with seat belts
with a mechanical prednatyazhitel
After operation of a prednatyazhitel of a belt the belt reuse is not allowed, replace a belt new.
At removal of a belt do not pull for straps — it can cause casual operation of a prednatyazhitel, damage of details and an injury of hands.
Dismantling and repair of a prednatyazhitel are not allowed.
At belt installation after a vvertyvaniye (without an inhaling) a bolt of fastening it is necessary to wind not less than 500 mm of a belt on the coil (after installation it can be extended from the coil).
After belt and pulling installation from the coil more than 2000 mm of a belt (from the center of a plate of the bottom fastening to the coil center) small breakthrough can cause operation of a prednatyazhitel.
The height of installation of a prednatyazhitel should not exceed 40 see.
Do not take in hands more than one prednatyazhitel.

Precautionary measures at the address with seat belts with a pyrotechnic prednatyazhitel
After operation of a prednatyazhitel of a belt the belt reuse is not allowed, replace a belt new.
At removal of a belt do not pull for straps — it can cause casual operation of a prednatyazhitel, damage of details and an injury of hands.
Dismantling and repair of a prednatyazhitel are forbidden.
Connect the storage battery only upon termination of installation of a prednatyazhitel.
At removal of a prednatyazhitel execute the following:
– be convinced that power supply is disconnected and ignition is switched off;
– disconnect a wire from the negative plug of the storage battery;
– wait not less than one minute;
– separate the contact socket of a gas generator, unscrew a bolt of fastening and remove a prednatyazhitel.
Installation is carried out as it should be, the return to removal.

       PREVENTION
Wrap up a fabric a screw-driver used at work or a stripper not to damage a detail.

Removal and installation of seat belts of forward seats
Before removal of a belt remove the following details:
– facing of a threshold of a forward door;
– facing of a threshold of a back door;
– bottom facing of an average rack of a body;
– top facing of an average rack of a body.
Remove a seat belt of a forward seat.
Installation is carried out as it should be, the return to removal.

Removal and installation of seat belts of lateral places of a back seat
Before removal of a belt remove the following details:
– back facing of a luggage compartment;
– lateral facing of a luggage compartment;
– facing of a back rack of a body.
Remove a belt of a lateral place of a back seat.
Installation is carried out as it should be, the return to removal.
Removal and installation of a seat belt of an average place of a back seat
Before removal of a belt remove the following details:
– back facing of a luggage compartment;
– lateral facing of a luggage compartment;
– facing of a back rack of a body.
Remove a belt of an average place of a back seat.
Installation is carried out as it should be, the return to removal.