q3 GTA 5

Hyundai Getz>> Body>> Features of a design
The body of Hyundai cars bearing, two - or four-door type a sedan, consists of a framework and hinged knots. The framework of a body including the basis, боковины, a roof and the details of a framework connected with each other by electric welding (dot, sutural and arc), represents not folding design possessing sufficient rigidity and capable to bear on itself all units of the car, hinged knots of a body and an interior detail.

       PREVENTION
Heavy body repair, and also replacement of the pasted wind and back glasses, as a rule, is necessary for carrying out in the conditions of Hyundai service station where for this purpose there is all necessary equipment and adaptations.

Lateral doors, cowl, back door, forward wings, bumpers and radiator facing belong to hinged knots. Doors, a cowl and a trunk lid fasten on a body by means of loops. Forward wings fasten to a body bolts.
Forward and back bumpers fasten bolts. Facing of a radiator fastens by means of plastic clamps and screws.
Windscreen three-layer type triplex. Glasses of doors, lateral and back flew down the tempered. Wind, back and lateral glasses are pasted in window apertures of a body.
Forward seats separate, with mechanisms of adjustment of an inclination of backs and movings in the longitudinal direction, with the easily removable head restraints regulated on height. A back seat with an integral pillow and a back divided by a folding armrest into two parts.
Lobbies and back lateral seat belts inertial, back belt of the average passenger the zone not inertial.
In salon of the car the lighter, forward and back ashtrays, antisolar peaks, a heater, rear-view mirrors, hand-rail are established. Under a seat of the driver fastening for the fire extinguisher is provided.
The car is equipped with forward and back towing eyes.
Management of ventilation and heating of salon is carried out in an automatic mode by the controler. If the car is equipped with climatic installation, the controler also operates a microclimate in salon in an automatic mode. The part of let-out cars can be equipped with ventilation and heating system with management manually.
The body is supplied with exhaust ventilation via the deflector with the valve established in a back wing of the car under facing of a bumper.